4D Systems uOLED-96-G2 0 96 96x64 pixel Intelligent OLED module with embedded Goldelox Processor SWTGWZTLL

£46.09 £81.89

Add to Cart
  • Product Code: SWTGWZTLL
  • Availability: In Stock

96 x 64 resolution, 65K true to life colours, PMOLED screen.0.96 diagonal size Active Area on the OLED Display.Powered by the 4D-Labs GOLDELOX graphics processor highly optimised for 4DGL, the high level 4D Graphics Language.On-board micro-SD memory card adaptor for storing of icons, images, animations, etc. Supports 64MB to 2GB micro-SD memory cards. A SPI compatible micro-SD card is required.Comprehensive set of built in high level 4DGL graphics functions and algorithms that can draw lines, circles, text, and much more.

The uOLED-96G2 is a compact and cost effective display module using the latest state of the art Passive Matrix OLED (PMOLED) technology with an embedded GOLDELOX graphics processor that delivers 'stand-alone' functionality to any project.

For more information and full documentation, visit the 4D Systems website.

Detailed Features:
- Low-cost OLED display graphics user interface solution.
- 96 x 64 resolution, 65K true to life colours, PMOLED screen.
- 0.96 diagonal size Active Area on the OLED Display.
- No back lighting with near 180 degree viewing angle.
- Easy 10 pin interface to any external device:
3.3Vout,
IO2,
GND,
IO1,
RESET,
GND,
RX,
TX,
+5V,
5V OUT.
- Powered by the 4D-Labs GOLDELOX graphics processor highly optimised for 4DGL, the high level 4D Graphics Language.
- 2 x GPIO ports supports: Digital I/O & AD converter with 8/10 bit resolution
- Complex sound generation
- Dedicated RTTTL tune engine
- Multi-Switch Joystick, Buttons
- Dallas 1-Wire
- 10K bytes of flash memory for user code storage and 510 bytes of RAM for user variables (255 x 16bit vars).
- 1 x Asynchronous hardware serial port, TTL interface, with 300 baud to 600K baud.
- On-board micro-SD memory card adaptor for storing of icons, images, animations, etc. Supports 64MB to 2GB micro-SD memory cards. A SPI compatible micro-SD card is required.
- Comprehensive set of built in high level 4DGL graphics functions and algorithms that can draw lines, circles, text, and much more.
- Display full colour images, animations, icons and video clips.
- Supports all available Windows fonts and characters (imported as external fonts).
- 4.0V to 5.5V range operation (single supply).
- Display Viewing Area: 20.1 x 13.4mm
- 4 x corner plates with 2mm holes for mechanical mounting.

Box Contains

1 x uOLED-96-G2 Display Module
1 x 150mm 5 way Female-Female jumper cable
1 x 5 way Male-Male adaptor
1 x Quick Start User Guide

4D Systems uOLED-96-G2 0 96 96x64 pixel Intelligent OLED module with embedded Goldelox Processor SWTGWZTLL

Write a review

Note: HTML is not translated!
    Bad           Good